Flowroute SIP Trunk

Flowroute is one of the world’s first software-centric carriers and enables users to enhance and create new services without complexity. With their HyperNetwork™ they are able to mesh multiple networks into a single telecom network providing their customers with superior reliability, reach, and simplicity.

The PBX natively integrates with Flowroute SIP trunking to support voice calling and SMS/MMS messaging. Within the PBX configuration, users can select Flowroute as their service provider to fully utilize both calling and messaging services.

To successfully integrate Flowroute with the PBX, you must complete the following high-level steps:

1. Obtain a Flowroute Account Create an account with Flowroute to gain access to SIP trunking and messaging services.

2. Log In and Configure Flowroute Settings After account creation, sign in to your Flowroute portal and complete the required configurations for voice and SMS/MMS services.

3. Configure Integration in the PBX Set up the Flowroute SIP trunk and messaging integration in the PBX Web Portal.

---

Topics Covered in This Article

• Purchase a DID on the Flowroute Platform

• Configuring Flowroute IP Authentication Trunk

• Configuring Outbound & Inbound Calls

• Flowroute SMS Integration